<p>A five fingered form fit 3 dimensional <span class="caps">NFPA 1979</span>-2007 certified structural fire fighting glove with curved forchettes and a 2 piece inset pre curved thumb. Outer construction is made with <span class="caps">PBI</span> silicone coated Kevlar knuckle and back of finger protection layered over black goatskin back with a Kevlar underlayer continuing along the back of the finger,to increase thermal protection. Supersoft cowhide palm overlayered with <span class="caps">PBI</span> silicone coated Kevlar palm patches using a <span class="caps">SKELETAL </span> design. Palm and side finger panels (forchettes) are goatskin .Gauntlet outer cuff is Supersoft cowhide with inner cowhide layer cuff with an elastic snugger band along the wrist crease at the palm and back.</p>
<p>The finger design features a roll over finger tip eliminating the seam at the finger tip to enhance tactility and touch with a digital layer of tough goatskin for added grip and protection on each fingertip pad.</p>
<p><strong>Thread</strong><br />The glove is sewn with 100% Kevlar 70 thread at minimum 10 spi.</p>
<p><strong>Barrier</strong><br />The vapor barrier is a monolithic breathable 2 part PU membrane that is durable light weight and flexible. The barrier is exceeds the <span class="caps">NFPA 1971 </span>-2007 5 chemical challenge and is bloodborne pathogen and viral penetration resistant.</p>
<p><strong>Liner</strong><br />The liner is an FR modacrylic liner/Kevlar palm that will not flame melt or drip.</p>
<p><strong>Cuff</strong><br />The cuff (Knitwrist version) is yellow Kevlar with spandex intersewn to ensure a snug fit during the life of the product. The gauntlet version is made with Supersoft cowhide with or without an inner cuff of Kevlar (as specified by the customer)</p>
<p><strong>Adhesive System</strong><br />All inner components are assembled using our <span class="caps">GLOVE BOND</span> adhesive system eliminating the need for tape at the finger tips. The adhesive is applied to a wide area at the fingers and palm area ensuring maximum bond between the liner / barrier and leather outer eliminating liner pull out completely.</p>
<p><strong>Quality</strong><br />All components are tested and inspected using our <span class="caps">ISO 9001</span> quality system with 3 individual inspections during the manufacturing process. Our entire quality system is certified annually with 2 complete audits of our manufacturing process (BSI institute for EN certification and Perry Johnson Registers for <span class="caps">NFPA</span>)</p>2008-11-18T10:35:41-05:00blaze-fighter-extrication4251622Gloves2008-11-18T10:35:41-05:00Blaze Fighter Extrication2008-11-18T10:35:41-05:00Glove Corp.blaze, blaze fighter, blaze fighter extrication, extrication, fighter, glove, gloves
A five fingered form fit 3 dimensional NFPA 1979-2007 certified structural fire fighting glove with curved forchettes and a 2 piece inset pre curved thumb. Outer construction is made with PBI silicone coated Kevlar knuckle and back of finger protection layered over black goatskin back with a Kevlar underlayer continuing along the back of the finger,to increase thermal protection. Supersoft cowhide palm overlayered with PBI silicone coated Kevlar palm patches using a SKELETAL design. Palm and side finger panels (forchettes) are goatskin .Gauntlet outer cuff is Supersoft cowhide with inner cowhide layer cuff with an elastic snugger band along the wrist crease at the palm and back.
The finger design features a roll over finger tip eliminating the seam at the finger tip to enhance tactility and touch with a digital layer of tough goatskin for added grip and protection on each fingertip pad.
*Thread*
The glove is sewn with 100% Kevlar 70 thread at minimum 10 spi.
*Barrier*
The vapor barrier is a monolithic breathable 2 part PU membrane that is durable light weight and flexible. The barrier is exceeds the NFPA 1971 -2007 5 chemical challenge and is bloodborne pathogen and viral penetration resistant.
*Liner*
The liner is an FR modacrylic liner/Kevlar palm that will not flame melt or drip.
*Cuff*
The cuff (Knitwrist version) is yellow Kevlar with spandex intersewn to ensure a snug fit during the life of the product. The gauntlet version is made with Supersoft cowhide with or without an inner cuff of Kevlar (as specified by the customer)
*Adhesive System*
All inner components are assembled using our GLOVE BOND adhesive system eliminating the need for tape at the finger tips. The adhesive is applied to a wide area at the fingers and palm area ensuring maximum bond between the liner / barrier and leather outer eliminating liner pull out completely.
*Quality*
All components are tested and inspected using our ISO 9001 quality system with 3 individual inspections during the manufacturing process. Our entire quality system is certified annually with 2 complete audits of our manufacturing process (BSI institute for EN certification and Perry Johnson Registers for NFPA)
98.992008-11-18T10:35:41-05:00manual90710645992deny1X-Small192.004251622truetrueX-Small2009-12-28T11:30:29-05:0098.992008-11-18T10:35:41-05:00manual90710646062deny1Small292.004251622truetrueSmall2009-12-28T11:30:29-05:0098.992008-11-18T10:35:41-05:00manual90710646082deny1Medium392.004251622truetrueMedium2009-12-28T11:30:29-05:0098.992008-11-18T10:35:41-05:00manual90710646092deny1Large492.004251622truetrueLarge2009-12-28T11:30:29-05:0098.992008-11-18T10:35:41-05:00manual90710646132deny1X-Large592.004251622truetrueX-Large2009-12-28T11:30:29-05:0098.992008-11-18T10:35:41-05:00manual90710646142deny1XX-Large692.004251622truetrueXX-Large2009-12-28T11:30:29-05:002008-11-18T10:35:41-05:007853402142516222008-11-18T10:35:41-05:00http://cdn.shopify.com/s/files/1/0001/1065/products/blazefighterext.jpg?1268214725